By For modern laminates, you don’t need to worry about daily cleaning and maintenance. That being said, it’s not that you should completely abandon the idea of cleaning them. Cleaning the textured laminate sheets once in a while is good enough to make them last for years.
Clean laminate surfaces aren’t just pleasant to look at, they also give hygiene to the space, which can lift the ambiance of the same and the mood of the people in it. A laminates catalogue will have guides on how to clean the surface with ease.
So, what are these hacks?
What to Do?
Here’s what you should do to keep your laminates aesthetic and functional:
Regular Dusting
To dust textured laminates, use a soft cloth. You will neither need a cleaner nor a cleaning solution for this task.
The most appropriate thing to use is a damp microfiber mop. It requires less water and picks up all the dirt. Using too much water on the surface can be counterproductive for the laminates.
Don’t use string mops to dust the surface as they are likely to leave marks on the same; it’s better to be safe than sorry.
Dealing with Spills and Drains
Simple spills on laminate sheets can be cleaned using water, but stubborn marks such as those from grease can be difficult to clean; difficult, but not impossible.
How? A mixture of lukewarm water and a small amount of dish soap that will clean the surface of the laminates while keeping the beauty of the same intact.
For greasy stains, you can use a solution that has equal quantities of water and white vinegar can get rid of grease marks and ink stains.
After using the cleaning solution, use a damp cloth without any soap to clean the surface. After you have done so, wipe down the surface using a dry, soft cloth.
What Not to Do?
We’ve talked about what you should do to keep your laminates shining, but what should you not do? The next section highlights those:
Abrasive Pads or Steel Wool
Scouring pads, sandpaper, or steel wool can leave undesirable marks on the surface that can be difficult to get rid of.
What to use, then? A damp cloth for regular dusting. Simple as that.
Avoid Using Excess Moisture
A damp cloth is recommended for cleaning laminate designs, but don’t make it too damp or downright wet; that will do more harm than good.
Wring the cloth completely to make sure that there is minimal water on the cloth.
Don’t Expose the Surface to Too Much Sunlight
While the designer laminate sheets are resistant to a lot of things, sometimes even light too. However, it may not be a good idea to purposely test the surfaces against sunlight.
The surface can be damaged by excess sunlight, so using a curtain to protect the surface from sunlight is preferred if it’s difficult to keep sunlight from falling on it.
Conclusion
With the help of this guide, you now know what to use to clean the laminate surface and what not to. Let the laminates never lose their shine, and you keep making an impression!
Comments